ESSMO 7 Year Graphene Ceramic Coating

Warning: Ceramic coatings cure into a durable, glass-like crystal. Avoid contact with skin, eyes, and face. In the event of skin contact, wash immediately with soap and water before the coating cures. Always use protective gloves and eye protection during application.

Deep Gloss & Reflective Shine

Achieve a mirror-like finish with enhanced paint clarity and depth. Graphene Ceramic Coating creates a rich, glossy look that commands attention.

7 Year* Ultra-Durable Armor

Graphene-infused coating offers up to 7 years* of extreme durability, shielding your vehicle from harsh weather, chemicals, and micro-abrasions.

Advanced Hydrophobic Technology

Graphene's formula offers superior water repellency, making maintenance effortless and protecting against contaminants.

Next-Level Technology. Maximum Performance

• Up to 7 Years* Durability with graphene-infused strength
• Anti-Static Surface reduces dust buildup
• Higher Scratch Resistance with 10H hardness
• Enhanced Water Repellency for easier cleaning
• Thermal Conductivity helps reduce heat buildup on surfaces

Installation

1. Prepare the Surface: Wash the car thoroughly, decontaminate with a clay bar to remove embedded contaminants, and polish to correct any scratches or swirl marks. Any marks or scratches WILL BE sealed underneath the coating and must be removed physically.
2. Clean the Surface: Wipe down the car with isopropyl alcohol (IPA) to remove oils and residues, ensuring a clean surface for coating adhesion.
3. Apply the Coating: Using an applicator pad, apply the ceramic coating in small sections with even strokes. Allow the coating to flash - this typically takes 30 seconds to 1-2 minutes.
4. Buff and Finish: Once the coating has flashed (appears hazy), gently buff it off with a clean microfiber towel to achieve a smooth, even finish
5. Curing: Allow the coating to cure for 12-24 hours, avoiding water, dust, or other contaminants during this period.

*Durability depends on installer skill, environment, and proper care. Annual maintenance coating is required to maintain optimal performance.